jim |
|
 No video on the monitor when MDVR is power supplied. |
 2009-6-29 13:46:36 |
|
S1: Please make sure that the cable connection is correct to
make the video input signal is valid.
S2: Check whether the power switch and ignition switch are on.
|
|
| |
| |
linda |
|
| Audio cable for the device connection is good but no sound for station announcement. |
2009-6-29 12:02:07 |
|
Q: Audio cable for the device connection is good but no sound for
station announcement.
S1: Make sure announcement station function is on in MDVR. The period is from
7 am to 8 pm
S2: First check announcement station file and make sure whether
external station announcement audio is existed. |
|
| |
| |
david |
|
| Why the device can not close after close the ignition switch? shut down delay function is ON. |
2009-6-29 11:56:38 |
|
Q: Why the device can not close after close the ignition switch?
S1: Check whether the system set, time set, shut down delay function is ON.
S2: Check the power cable. Measure with millimeter whether the
yellow signal cable still has voltage after close the ignition switch.
|
|
| |
| |
allen |
|
| Why the device can not record normally? |
2009-6-29 11:50:19 |
|
Q: Why the device can not record normally?
S: Please check whether the record status is on and whether the
record time is correct. The correct is “everyday, timing, 00:00 to 23:59 ”
|
|
| |
| |
John |
|
| Why the announcement station doesn’t work? |
2009-6-27 19:05:15 |
|
Q: Why the announcement station doesn’t work?
S1: Check whether the announcement files is existed in the MDVR.
S2: Check whether the GPS has signal.
S3: First press station announcement manually, if it works, then
make the setting as auto announcement.
|
|
| |
| |
| | |
| |
Total:5Records Page:1/1 PageSize:6Records
1 |
English
